Gyro Indoor / Outdoor Ceiling Fan

You can now enjoy truly unsurpassed comfort with the “Gyro” wet-rated fan outdoors. This multi-function marvel gives you the best of both worlds by combining oscillating and ceiling fan functions. Gently sweep the room or direct the air stream right where you need it via remote control. The side fans can be tilted individually. Design: Mark Gajewski, G Squared

click here for specifications

printable PDF cut sheet

Step 1 Select the finish

Please choose the finish of the fan. The blades as shown in the pictures below are always included in a sealed box with the fan. You will get a chance to add optional blades in Step 4 below.

Gyro Indoor / Outdoor Ceiling Fan
F402-BNW
Brushed nickel wet with schoolhouse light and silver blades

$699.95 add to cart

Gyro Indoor / Outdoor Ceiling Fan
F402-ORB
Oil rubbed bronze with schoolhouse globe light

$719.95 add to cart

Gyro Indoor / Outdoor Ceiling Fan
F402-WH
White with schoolhouse globe light (not pictured)

$679.95 add to cart

Step 2 Select the downrod length based on your ceiling height

Gyro Indoor / Outdoor Ceiling Fan optional downrod photo

Diagram of the Gyro Indoor / Outdoor Ceiling Fan fan.

This fan is OK for standard 8 foot ceilings. Optional downrods are available for high ceilings. To calculate the distance from the ceiling to the bottom of the blades, add the length of the downrod to the dimension on the right of the diagram. For safe blade height subtract this distance from the height of your ceiling at the point where the fan will be mounted and make sure that it is at least 84 inches (7 feet).

Optional Downrods

Step 3 Select optional accessories

The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed. If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.

Hand held remote
RC212 White

$28.00 add to cart

Sloped ceiling adapter
A245 -Will match dnrod

$25.00 add to cart

Specifications and What Comes Standard with this Fan

printable PDF cut sheet

42" total maximum sweep
1000-1500 rpm side fan speeds
Side fan heads independently adjustable
Fan assembly rotates at 3 rpm
Integrated 100 watt halogen bulb, bulb included
Cap for non-light use included
Lifetime warranty on motor, 1 year on rest of fan
Sloped ceilings OK up to 29 degrees without adapter
Sloped ceilings up to 45 degrees OK with accessory adapter available at additional cost
UL wet location approved for indoor/outdoor use

Models available:
F402-ORB - oil rubbed bronze with schoolhouse globe light
F402-BNW - brushed nickel wet with schoolhouse globe light
F402-WH - white with schoolhouse globe light

Controls:
Wall mount touch control included – incorporating fully independent fan head and axis rotation speeds plus infinite dimmer for light; fits in Decora sized wall plate
Hand held remote available at additional cost – can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending radio frequency signals to receiver in fan – no need for third wire when wiring for fan

Downrods:
Fan comes standard with 3 1/2” and 6” downrods – length to bottom of fan is 14 ½” with 3 ½” downrod and 17” with 6” downrod (good for 8 foot ceilings)
Longer accessory downrods are available at additional cost in 12”, 18”, 24”, 36”, 48”, 60”, and 72” lengths
Downrods cannot be added together or cut to fit
Sloped ceiling adapter kit is available for ceilings with slopes between 30 and 45 degrees at additional cost