Concept II Indoor/Outdoor Ceiling Fan

The Concept II 52" indoor/outdoor fan is a simple and practical ceiling hugger that is easy to assemble and install. It is UL Wet Location approved and is ideal for patios, screened rooms, and other indoor/outdoor areas.

Step 1 Select the finish

Please choose the finish of the fan. The blades as shown in the pictures below are always included in a sealed box with the fan. You will get a chance to add optional blades in Step 4 below.

Concept II Indoor/Outdoor Ceiling Fan
F574-BNW
Brushed nickel wet with silver blades

$299.95 add to cart

Concept II Indoor/Outdoor Ceiling Fan
F574-WH
White with white blades

$279.95 add to cart

Concept II Indoor/Outdoor Ceiling Fan
F574-ORB
Oil rubbed bronze with taupe blades

$299.95 add to cart

Step 2 Select the downrod length based on your ceiling height

Diagram of the Concept II Indoor/Outdoor Ceiling Fan fan.

This fan is OK for standard 8 foot ceilings. Optional downrods are available for high ceilings. To calculate the distance from the ceiling to the bottom of the blades, add the length of the downrod to the dimension on the right of the diagram. For safe blade height subtract this distance from the height of your ceiling at the point where the fan will be mounted and make sure that it is at least 84 inches (7 feet).

No Downrods available for this product
white filler

Step 3 Select optional accessories

The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed.

Hand held remote
RC212 White

$28.00 add to cart

specifications

52" diameter blades
3 speeds; reversible
Integrated 100 watt, mini-can halogen light, bulb included
Cap for non-light use included
Lifetime warranty on motor, 1 year on rest of fan
UL wet location approved for indoor/outdoor use
Flush mount fan ideal for low ceiling environments
Total hanging depth 12" with or without light

Models available:
F574-BNW - brushed nickel wet with silver blades and opal glass
F574-WH - white with white blades and opal glass
F574-ORB - oil rubbed bronze with taupe blades and pietra glass

Controls:
Full function wall control included – controls 3 speeds, reverse, plus infinite dimmer for light
Hand held remote control available at additional cost – can be used along with wall control or alone
Both wall mount and hand held controls work by sending radio frequency signals to receiver in fan – no need for third wire when wiring for fan

Optional blades:
Fan comes with blade finishes as shown; optional blades available at additional cost include solid dark maple brown color (not shown), solid dark walnut brown color (not shown), silver, and white