The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed.
If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.
60" diameter blades
Blades made of high impact ABS plastic
3 speeds; reversible
Integrated 100 watt mini-can halogen light
Cap for non-light use included
Lifetime warranty on motor, 1 year on rest of fan
Sloped ceilings OK up to 29 degrees without adapter
Sloped ceilings up to 45 degrees OK with accessory adapter available at additional cost
UL wet location approved for indoor/outdoor use
Models available:
F579-ORB - oil rubbed bronze with parchment all weather blades with seeded amber glass lantern
F579-BNW - brushed nickel wet with silver all weather blades with seeded frosted glass lantern
Controls:
Wall mount touch control included – controls 3 speeds, reverse, plus infinite dimmer for uplight and downlight; fits in Decora sized wall plate
Hand held remote available at additional cost – can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending RF signals to receiver in fan – no need for third wire when wiring for fan
Downrods:
Fan comes standard with 3 1/2” and 6” downrods – length to bottom of fan is 16 ½” with 3 ½” downrod and 19” with 6” downrod (good for 8 foot ceilings)
Longer accessory downrods are available at additional cost in 12”, 18”, 24”, 36”, 48”, 60”, and 72” lengths
Downrods cannot be added together or cut to fit
Sloped ceiling adapter kit is available for ceilings with slopes between 30 and 45 degrees at additional cost