Espacio I Ceiling Fan

A crisp, refined look that adds distinction to any room and provides 100 watts of light along with excellent air circulation. The Espacio I comes in a warm oil rubbed bronze with medium maple blades and elegant excavation glass or in cool brushed nickel and chrome with soft maple blades and white opal glass. Design: Mark Gajewski, G Squared

click here for specifications

printable PDF cut sheet

Step 1 Select the finish

Please choose the finish of the fan. The blades as shown in the pictures below are always included in a sealed box with the fan. You will get a chance to add optional blades in Step 4 below.

Espacio I Ceiling Fan
F750-BN/CH
Espacio I fan, brushed nickel with soft maple blades

$329.95 add to cart

Espacio I Ceiling Fan
F750-ORB
Espacio I fan, oil rubbed bronze with medium maple blades

$349.95 add to cart

Step 2 Select the downrod length based on your ceiling height

Espacio I Ceiling Fan optional downrod photo

Diagram of the Espacio I Ceiling Fan fan.

This fan is OK for standard 8 foot ceilings. Optional downrods are available for high ceilings. To calculate the distance from the ceiling to the bottom of the blades, add the length of the downrod to the dimension on the right of the diagram. For safe blade height subtract this distance from the height of your ceiling at the point where the fan will be mounted and make sure that it is at least 84 inches (7 feet).

Optional Downrods

Step 3 Select optional accessories

The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed. If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.

Hand held remote
RC210 White

$36.00 add to cart

Sloped ceiling adapter
A245 -Will match dnrod

$25.00 add to cart

Specifications and What Comes Standard with this Fan

printable PDF cut sheet

56" diameter blades, 14 degree pitch
3 speeds, reversible
Integrated downlight - two 50W mini-can halogen bulbs, bulbs included
Downlight fully dimmable
Lifetime warranty on motor, 1 year on rest of fan
Sloped ceilings OK up to 29 degrees without adapter
Sloped ceilings up to 45 degrees OK with accessory adapter available at additional cost

Models available:
F750-ORB - oil rubbed bronze with medium maple blades, integrated halogen light with excavation glass
F750-BN/CH - brushed nickel and chrome with soft maple blades, integrated halogen light with white frosted opal glass

Controls:
Wall mount touch control included - controls 3 speeds, reverse, plus dimmer for downlight; fits in Decora sized wall plate
Hand held remote available at additional cost - can be used along with wall switch or alone (without need to install wall switch)
Both wall mount and hand held controls work by sending radio frequency signals to receive in fan - no need for third wire when wiring for fan

Downrods:
Fan comes standard with 3 1/2" and 6" downrods - length to bottom of fan is 14 1/2" with 3 1/2" downrod and 17" with 6" downrod (good for 8 foot ceilings)
Longer accessory downrods are available at additional cost in 12", 18", 24", 36", 48", 60", and 72" lengths
Downrods cannot be added together or cut to fit
Sloped ceiling adapter kit is available for ceiling with slopes between 30 degrees and 45 degrees at additional cost