Instructions
Please click here to check what comes standard with this fan Step 1 Select the finishStep 2 Select the downrod length
based on your ceiling height
Step 3 Select optional accessories
Thank You!
Artemis Ceiling Fan
The Artemis ceiling fan is a winner of the GOOD DESIGN award of the Chicago Athenaeum. The organic shape of the blades creates no noise – they slice through the air in nearly total silence. The design is also ecologically sound: the blades form the body so there is no waste. The fan is made mostly from recyclable materials. Design: Mark Gajewski, G Squared.
Please choose the finish of the fan. The blades as shown in the pictures below are always included in a sealed box with the fan. You will get a chance to add optional blades in Step 4 below.
This fan is OK for standard 8 foot ceilings. Optional downrods are available for high ceilings.
To calculate the distance from the ceiling to the bottom of the blades, add the length of the downrod to the dimension on the right of the diagram.
For safe blade height subtract this distance from the height of your ceiling at the point where the fan will be mounted and make sure that it is at least 84 inches (7 feet).
Optional Downrods
The hand held remote will operate the fan independently of the wall switch: if you choose it the wall switch will not have to be installed. If your ceiling slope is greater than 30 degrees but less than 45 degrees you will need the slope adapter to install the fan.
Specifications and What Comes Standard with this Fan